Page 1
Glyde™ Accessories Technical Specication
(160mm)
(45mm)
(86mm)
Towel Ring YB2386
Stock Numbers:
YB2386BN – Towel Ring
Brushed Nickel Finish
YB2386CH – Towel Ring
Chrome Finish
Dimensions:
3-7/16"
1-3/4"
6-5/16"
Materials:
Towel Ring post is constructed of zinc.
Ring is aluminum.
Installation Instructions:
Directions below are for installation into drywall. If installing product into a stud,
use the wood screws only.
1. Using ¼” drill bit, drill one pilot hole for post.
2. Position mounting post to wall by inserting wall anchor into pilot hole and
pressing rmly.
3. Make sure that locking tab on mounting post is facing down.
4. Tighten wall anchor screw while holding mounting post rmly in place.
Tighten anchor until resistance increases. DO NOT over tighten.
5. Using tip of screw bit press wall spikes (metal pieces on outer edge of
mounting post) into drywall.
6. Attach post by pressing rmly to mounting post until it clicks. (The square
opening at the base of the post must be facing down to match-up with
locking tab).
Cleaning Instructions:
To preserve the ne nish of this product, clean only with a soft damp
cloth. Dry well. Do not use commercial or abrasive cleaners.
Stock Number: _______________________ Towel Ring
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 • FAX: (800) 848-6636
INTERNATIONAL: (440 ) 962-2000 • FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: (888) 379-2720
WWW.MOEN.COM
©
Copyright Moen Incorporated
Loading...