Page 1
Glyde™ Accessories Technical Specication
(78mm)
(45mm)
18" & 24" Towel Bar YB2318 & YB2324
Stock Numbers:
YB2318BN – 18" Towel Bar
Brushed Nickel Finish
YB2318CH – 18" Towel Bar
Chrome Finish
YB2324BN – 24" Towel Bar
Brushed Nickel Finish
YB2324CH – 24" Towel Bar
Chrome Finish
Materials:
Towel Bar posts are constructed of
zinc. Bar is aluminum.
Dimensions:
18" Towel Bar
18"
(457mm)
24" Towel Bar
24"
(610mm)
1-3/4"
3-1/16"
Installation Instructions:
Directions below are for installation into drywall. If installing product into a
stud, use the wood screws only.
1. Mark the appropriate distance for your towel bar on the wall where
you want to install the product.
2. Use a level to ensure that the pilot holes will be perfectly level.
3. Using ¼" drill bit, drill one pilot hole for each post.
4. Position mounting posts to wall by inserting wall anchors into pilot
holes and pressing rmly. (Make sure that locking tab on mounting
post is facing down.)
5. Tighten wall anchor screw while holding mounting post rmly in
place. Tighten anchor until resistance increases. DO NOT over
tighten.
6. Using tip of screw bit press wall spikes (metal pieces on outer edge
of mounting post) into drywall.
7. Towel bar must be attached to mounting posts as a unit – insert towel
bar into each post.
8. Attach posts by pressing rmly to mounting posts until it clicks. (The
square opening at the base of the post must be facing down to
matchup with locking tab).
Cleaning Instructions:
To preserve the ne nish of this product, clean only with a soft damp
cloth. Dry well. Do not use commercial or abrasive cleaners.
Stock Number: ________________________ Towel Bar
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 • FAX: (800) 848-6636
INTERNATIONAL: (440 ) 962-2000 • FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: (888) 379-2720
WWW.MOEN.COM
©
Copyright Moen Incorporated
Loading...