Page 1
YB8807BN – Drawer Pull
Brushed Nickel Finish
YB8807CH – Drawer Pull
Chrome Finish
25300 AL MOEN DR IVE N ORTH OLMSTED , OH 44070
CORPORATE HEADQUARTER S: (800) 321-8809 F AX: (800) 848-6636
INTERNATI ONAL: (440) 962 -2000 F AX: (440) 962-2726
CUSTOMER SERVIC E (USA): 800-882-0116 F AX: (888) 379-2720
WWW .MOEN . COM
Copyright Creative Specialties International Literature # BA1559
Drawer Pulls are constructed of zinc.
Cleaning Instructions:
1. Drawer pulls w ill require tw o 3/16” holes.
2. The distance betw een holes is 3” on center.
3. Using a level, mark the location of the tw o holes.
4. Use a 3/16” drill bit to drill tw o holes.
5. Insert the screws into each hole.
6. Place the draw er pull over the screws.
7. Use a Phillips screw driver to tighten screw s.
Stock Number:______________________Drawer Pull
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Drawer Pull
YB8807
90°™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Loading...