Moen MOE8980 Specifications

 CSI SecureMount Anchors meet or

exceed the applicable requirements
of the following standards:
ADA
ANSI A117.1
ASTM F446
CSA B45
CSA B651

 For use only when securely installed

in approved substrates* for persons

no more than 300lbs.

*Requires a 3½” space behind the wall

and works in the following substrates

• 1/2” or 5/8 ” Dry Wall

• 1/2” or 5/8 ” Dry Wall with Tile

• 1/2” or 5/8 ” Dry Wall with Marble

• 1/8” or 1/4 ” Fiberglass Tub Surround

SecureMount Anchor mounting plate
is made of aluminum.

SecureMount Anchor guide and
anchor are made of POM.

 SMA1002CH –SecureMount

Anchors

Chrome Finish

2 Anchors

Direction for w all mounting installation:

1. Position grab bar on wall in desired location and mark around the outside of the flanges.

2. One at a time, center the mounting plate within the marked flanges, and mark the center
hole for drilling.

3. Drill one 1¼” hole at each mounting location.

4. Insert guide sleeves into each hole in the wall. (Note: UP indicator must alw ays point up
regardless of grab bar orientation)

5. Connect pull tab to the secure mount anchor.

6. With pull tab up, insert the anchor all the way into the hole in the wall.

7. Pull back on the pull tab, and disconnect it from the anchor.

8. Place mounting plate over the hole and secure with the anchor screw, and flat and
rubber w ashers. (Note: Bar indicators should be facing in, align arrows)

9. Align the grab bar flanges to the secure mount anchor and secure w ith flange screws
and split lock w asher.

Directions for stud mounting installation:

1. Position grab bar on wall in desired location and mark around the outside of the flanges.

2. Determine stud center and drill one 1/8” pilot hole at each location.

3. Install w ood screw supplied with grab bar.

4. Install the 3 additional w ood screws through the grab bar flange into the elongated
mounting plate slots.

Stock Number:_______________ SecureMount Anchor
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

SecureMount Anchor

SMA1002CH

Home Care Technical Specification

25300 AL MOEN DRIVE  NOR TH OLMSTED, OH 44070
CORPORATE H EADQUAR TERS: [phone]  FAX: [phone]
INTERNATI ONAL: [phone]  FAX: [phone]
CUSTOMER SER VICE (USA): 800-882-0116  F AX: [phone]
WWW.MOEN.COM

Copyright Creative Specialties International

Literature #BA1387

Compliance: