Page 1
Towel Bar posts are die cast from
highest quality zinc alloy (zamac).
Bars are square aluminum. Posts
and bars are triple plated with a
polished brass or polished chrome
finish.
2218 – 18” Towel Bar
Polished Chrome Finish
Concealed Screw Mounting
¾” Square Bar
2218PB – 18” Towel Bar
Polished Brass Finish
Concealed Screw Mounting
¾” Square Bar
2224 – 24” Towel Bar
Polished Chrome Finish
Concealed Screw Mounting
¾” Square Bar
2224PB – 24” Towel Bar
Polished Brass Finish
Concealed Screw Mounting
¾” Square Bar
2230 – 30” Towel Bar
Polished Chrome Finish
Concealed Screw Mounting
¾” Square Bar
Cleaning Instructions:
1. Remove mounting brackets from back of fixtures by loosening the set
screws.
2. Position assembled unit on wall in desired location.
3. Lightly mark the outlines of the bases of the unit.
4. Center mounting brackets inside the outline.
5. Mark hole locations. Attach brackets to wall using 1 3/8” screws
(provided).
6. Mount bases on brackets. Tighten set screws on the bottoms.
Note: Wood blocking is preferable behind all wall surfaces.
If wood blocking is not available, the following optional fasteners are
suggested: Tile/Masonry – Plastic or Lead Anchors; Plaster/Drywall –
Toggle Bolts.
Stock Number:______________________Towel Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Bars
2218, 2224, 2230
Contemporary Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN DRIVE . NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 . FAX: (800) 848-6636
INTERNATIONAL: (440) 962-2000 . FAX: (440) 962-2726
CUSTOMER SERVICE (UAS): 800-882-0116 . FAX: (888) 379-2720
WWW.MOEN.COM
©Copyright Creative Specialties International Literature #BA0992
Loading...