Page 1
Robe Hook is die cast from highest
quality zinc alloy (zamac). Castings
are triple plated with a polished brass
or a polished chrome finish.
2030 – Double Robe Hook
Polished Chrome Finish
Concealed Screw Mounting
Cleaning Instructions:
1. Remove mounting bracket from back of fixture by loosening the set
screw.
2. Position unit on wall in desired location.
3. Lightly mark the outline of the base of the unit.
4. Center mounting bracket inside the outline.
5. Mark hole locations. Attach bracket to wall using 1 3/8” screws
(provided).
6. Mount base on bracket. Tighten set screw on the bottom.
Note: Wood blocking is preferable behind all wall surfaces.
If wood blocking is not available, the following optional fasteners are
suggested: Tile/Masonry – Plastic or Lead Anchors; Plaster/Drywall –
Toggle Bolts.
Stock Number:______________________Robe Hook
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Robe Hook
2030
Contemporary Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN DRIVE . NORTH OLMSTEA D, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809. FAX: (800) 848-6636
INTERNATIONAL: (440) 962-2000 . FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 . FAX: (888) 379-2720
WWW.MOEN.COM
©Copyright Creative Specialties International Literature #BA0990
Loading...