Page 1
DESCRIPTION
(178 mm)
(35 mm)
• Metal construction with various nishes identied by sux
• Includes showerhead, arm, ange and diverter tub spout
OPERATION
• Handle operates counterclockwise through a 270° arc with
o at 6 o’clock and maximum hot at the 9 o’clock position.
Shut o in clockwise direction
• Adjustable temperature limit stop to control maximum hot
water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 3°
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi
• EP sux models are limited to 1.75 gpm (6.6 L/min) at 80 psi
• NH sux models contain no showerhead
CARTRIDGE
• 1222 cartridge design
• Accommodates back to back installations
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certied to meet ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• EP sux models are third party certied to WaterSense®
• ADA for lever handle
WARRANTY
• Limited lifetime warranty against leaks, drips and nish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Finished wall line Face of stud
CC
1-7/8" (48 mm)
Max.
Specifications
GLYDE™
Single-Handle Tub/Shower Trim Kit
Models: T2741 series - valve trim only
T2742 series - shower trim only
T2743 series - tub/shower trim
T62742 (bulk)
T62743 (bulk)
Valves: 62300 series
2500 series
IPS
2" (51 mm)
Max.
3-3/4"
(95 mm)
7"
2-15/16"
(75 mm)
M•pact™ System
2-3/4"
(69 mm)
7-9/16"
(189 mm)
2-5/8"
(66 mm)
IPS
CC
5/8" (16 mm)
Wall Opening
4-1/2"
(114 mm)
Tub Rim
1/2" (13 mm)
2-1/2"
(63 mm)
1-3/8"
(35 mm)
45" (1143 mm) Min.
48" (1219 mm) Max.
Floor
Min.
Max.
C
L
Shower
Tub only &
Tub/Shower
32" (813 mm)
Min.
CRITICAL DIMENSIONS
(DO NOT SCALE)
6' 6"
(1981 mm)
Diameter Wall Opening
3-1/2" (89 mm) Max.
2-1/4" (57 mm) Min.
THIN WALL APPLICATIONTHICK WALL APPLICATION
EP Sux
Models Only
(typ)
3/16"
(5 mm)
Plaster
Ground
Plastic
Tub/Shower
Surround
1-3/8"
Rev. 11/15
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Loading...