Page 1
Drawer Pulls are constructed of zinc.
YB8407BN – Drawer Pull
Brushed Nickel Finish
YB8407CH – Drawer Pull
Chrome Finish
YB8407NL – Drawer Pull
Nickel Finish
YB8407ORB – Drawer Pull
Oil Rubbed Bronze Finish
Cleaning Instructions:
25300 AL MOE N D RIV E N ORT H O LMS TE D, OH 440 70
CORP ORATE HE ADQ UAR TERS: (8 00) 32 1- 880 9 FAX: (8 00) 848- 663 6
INTE RNA TIONA L: (440) 962-2 000 FA X: (44 0) 962 -2726
CUST OMER SER VIC E (USA): 80 0- 882 -0116 FAX: ( 888 ) 3 79 -2720
WWW .MO EN. COM
Copyright Creative Specialties International Literature #BA1625
1. Drawer pulls will require two 3/16” holes.
2. The distance between holes is 3” on center.
3. Using a level, mark the location of the two holes.
4. Use a 3/16” drill bit to drill two holes.
5. Insert the screws into each hole.
6. Place the drawer pull over the screws.
7. Use a Phillips screwdriver to tighten screws.
Stock Number:______________________Drawer Pull
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Drawer Pull
YB8407
Weymouth
TM
Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Loading...