Page 1
Edgestone™ Accessories Technical Specication
(539mm)
(387mm)
11/16"
(16mm)
(16mm)
18"& 24" Towel Bar YB4698 & YB4694
Stock Numbers:
YB4694BN – 18" Towel Bar
Brushed Nickel Finish
YB4694CH – 18" Towel Bar
Chrome Finish
YB4694BN – 24" Towel Bar
Brushed Nickel Finish
YB4694CH – 24" Towel Bar
Chrome Finish
Materials:
Dimensions:
11/16"
18" Bar
15-1/4"
24" Bar
21-1/4"
Installation Instructions:
Towel Bar Posts are constructed of zinc.
Bar is constructed of aluminum.
1. Position Pro-Fit Installation Mounting Template on wall in desired location.
2. Using level align the template to the wall.
3. Using ¼” drill bit, drill one pilot hole for each post.
4. Position mounting post to wall by inserting wall anchor into pilot hole and
pressing rmly.
5. Make sure that locking tab on mounting post is facing down (6 o’clock).
6. Tighten wall anchor screw while holding mounting post rmly in place.
7. Towel bar must be attached to mounting posts as a unit – insert towel bar
into each post.
8. Attach posts by pressing rmly to mounting posts until it clicks. (The square
opening at the base of the post must be facing down to matchup with locking
tab.)
Cleaning Instructions:
To preserve the ne nish of this product, clean only with a soft damp cloth. Dry
well. Do not use commercial or abrasive cleaners.
Stock Number: ________________________ Towel Bar
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 • FAX: (800) 848-6636
INTERNATIONAL: (440 ) 962-2000 • FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: (888) 379-2720
WWW.MOEN.COM
©
Copyright Moen Incorporated
Loading...