Page 1
Edgestone™ Accessories Technical Specication
2-5/8"
Towel Bar Posts YB4600
Stock Numbers:
YB4600BN – Towel Bar Posts
Brushed Nickel Finish
YB4600CH – Towel Bar Posts
Chrome Finish
Materials:
Dimensions:
1-29/64"
(37mm)
(66mm)
2-15/16"
(74mm)
Installation Instructions:
Towel Bar Posts are constructed of zinc. Bar is
constructed of brass.
This product features the Pro+Fit Installation Mounting System. If you do not have the
Pro+Fit Installation Template please use the following instructions. (Note: only one hole is
required per mounting post.)
1. Find the appropriate center to center measurement for the product you are installing.
2. Mark that distance on the wall where you want to install the product.
3. Use a level to ensure that the pilot holes will be perfectly level.
4. Using ¼" drill bit, drill one pilot hole for each post 18" apart for the 18" towel bar (24"
for the 24" towel bar).
Position mounting post to wall by inserting wall anchor into pilot hole and pressing rmly.
5.
6. Make sure that locking tab on mounting post is facing down (6 o’clock).
7. Tighten wall anchor screw while holding mounting post rmly in place. DO NOT over
tighten (6 – 8 full turns will secure the anchor).
8.
Towel bar must be attached to mounting posts as a unit – insert towel bar into each post.
9. Attach posts by pressing rmly to mounting posts until it clicks. (The square opening at
the base of the post must be facing down to match-up with locking tab.)
If you are mounting any parts into a hard surface snap off the anti-rotation ns on the back
of the mounting posts.
Cleaning Instructions:
To preserve the ne nish of this product, clean only with a soft damp cloth. Dry well. Do
not use commercial or abrasive cleaners.
Stock Number: ___________________ Towel Bar Posts
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 • FAX: (800) 848-6636
INTERNATIONAL: (440 ) 962-2000 • FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: (888) 379-2720
WWW.MOEN.COM
©
Copyright Moen Incorporated
Loading...