Page 1
YB5203CH – Robe Hook
Chrome Finish
YB5203BN – Robe Hook
Brushed Nickel Finish
25300 AL MOEN D R IVE NORTH OLMS T E D , OH 44070
CORPORATE HEA D Q U A R T E R S : (800) 321 - 8809 FAX: (800) 848-6636
INTERNATIONA L: (440) 962-2000 FAX: (440) 9 6 2 -2726
CUSTOMER SERV ICE (USA): 800-882-0116 FAX: (888) 3 7 9 -2720
WWW.MOEN.COM
© 2014 Moen Incorporated. Moen is a registered trademark and Oxby is a trademark of
Moen Incorporated. All rights reserved.
Robe Hook is constructed of zinc.
Cleaning Instructions:
Stock Number: YB5203 Robe Hook
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Robe Hook
YB5203
Wynford® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
1) Position the mounting template on the wall in the desired location.
2) Using a level, align the template and tape it to the wall.
3) Drill two ¼” holes at each mounting post location that corresponds to
your product.
4) Remove the template from the wall.
5) Lightly tap anchors until flush with the wall.
6) Remove mounting post from the product assembly by loosening the
setscrew.
7) Place mounting post over anchors (notch facing downward and insert
screw through post into anchors.
8) Tighten screw
Loading...