Page 1
Specifications
There is more than 1 version of this model.
Page down to identify the version you have.
Model
Number
Faucet
KG2045522 2 5.5 Center-2”
TG2045522 2 5.5 Center-2”
SINK DESCRIPTION
• 2000 series single bowl drop-in sink
• 20 gauge stainless steel, Brushed nish
• Center drain, 1 to 4 faucet holes as indicated
• U-Channel mounting system, hardware included
• SoundSHIELD sound absorbing system
• Sealite integrated drain assembly included
• Faucet sku #4904 included where indicated
CUT OUT DIMENSIONS (For sinks manufactured after 9/1/2016)
• 16-1/8" x 16-13/16" with 3/8" corner radius, a tolerance of plus or minus
1/16" is acceptable
STANDARDS
• Third party certied by IAPMO to meet ASME A112.19.3/CSA B45.4
and all applicable specications referenced
WARRANTY
• Limited lifetime warranty against material or manufacturing defects
to the original consumer purchaser
Holes
Depth-
Inches
Drain
Placement
Includes
Drain & Drain Basket
Faucet, Drain & Drain Basket
Faucet Hole Congurations
1-1/2" (38mm) diameter faucet holes
4" (102mm) Center
4”
2
Model
Specified
Rev. 1/17
5/16" R.
TYP.
(8mm)
(For sinks manufactured after 9/1/2016)
2"
2"
(51mm)
(51mm)
1-1/4" DIA. TYP.
2" (51mm)
SEALTITE DRAIN
10"
(254mm)
16-5/8"
(422mm)
(32mm)
2-5/8" R.
TYP.
(67mm)
(152mm)
3-5/8"
(92mm)
6"
17-5/16"
(439mm)
12"
(304mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
Installation Detail
SINK OVERALL DIMENSION
SEALANT MATERIAL
COUNTERTOP
SINK
CLAMP
www.moen.com
Page 2
Specifications
(DO NOT SCALE)
Model
Number
Faucet
Holes
KG2045522 2 5.5 Center-2”
TG2045522 2 5.5 Center-2”
SINK DESCRIPTION
• 2000 series single bowl drop-in sink
• 20 gauge stainless steel, Brushed nish
• Center drain, 1 to 4 faucet holes as indicated
• U-Channel mounting system, hardware included
• SoundSHIELD sound absorbing system
• Sealite integrated drain assembly included
• Faucet sku #4904 included where indicated
CUT OUT DIMENSIONS (For sinks manufactured before 9/1/2016)
• 12-1/2" x 16-5/8" with 3/8" corner radius, a tolerance of plus or minus
1/16" is acceptable
STANDARDS
• Third party certied by IAPMO to meet ASME A112.19.3/CSA B45.4
and all applicable specications referenced
WARRANTY
• Limited lifetime warranty against material or manufacturing defects
to the original consumer purchaser
Depth-
Inches
Drain
Placement
Includes
Drain & Drain Basket
Faucet, Drain & Drain Basket
Faucet Hole Congurations
1-1/2" (38mm) diameter faucet holes
4" (102mm) Center
4”
2
Model
Specified
Rev. 4/16
5/16" R.
TYP.
(8mm)
(For sinks manufactured before 9/1/2016)
2"
2"
(51mm)
(51mm)
1-1/4" DIA. TYP.
(32mm)
2" (51mm)
SEALTITE DRAIN
2-5/8" R.
TYP.
(67mm)
10" (254mm)
13"
(330mm)
3-5/8"
(92mm)
6"
(152mm)
17-1/8"
(435mm)
12"
(304mm)
CRITICAL DIMENSIONS
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
Installation Detail
SINK OVERALL DIMENSION
SEALANT MATERIAL
COUNTERTOP
SINK
CLAMP
www.moen.com
Loading...