Page 1
CRITICAL DIMENSIONS
(DO NOT SCALE)
TS2713sp: Rev. 1/11
THIN WALL APPLICATIONTHICK WALL APPLICATION
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes showerhead, arm, flange and diverter spout
OPERATION
• Lever style handle with temperature indicator on the escutcheon
• Handle operates counterclockwise through a 270˚ arc with off at
6 o’clock and maximum hot at the 9 o’clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 3.6° F (±2˚ C)
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi
• EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi
• NH suffix models contain no showerhead
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein
• EP suffix models are IAPMO Green listed and third party certified to
WaterSense®
•
ADA for lever handle
WAR RANT Y
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
90 DEGREE ™ POSI-TEMP
®
Single-Handle Tub/Shower Trim Kit
Model: TS2711 series - valve trim only
TS2712 series - shower trim only
TS2713 series - tub/shower trim only
Valves: 62300, 2500 series
Spec i fi ca tions
EP Suffix Models Only
(157mm)
6-7/16”
(164mm)
HOT
INLET
7-1/2"
(191mm)
MIN
6-3/16”
2-7/16”
(62mm)
2-1/2”
(64mm)
COLD
INLET
2" CC (51mm)
1-7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
4-1/2" (114mm)
WALL OPENING
8-3/8”
(213mm)
TUB RIM
7-1/4”
(185mm)
FACE OF STUD
FLOOR
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
2-1/2" MAX. (63mm)
C
L
1-3/8" (35mm)
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
45" (1143mm)/
TUB SHOWER
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
6'-6"
(1981mm)
FLOOR LINE
3/16" (typ) (5mm)
PLASTER GROUND
1-1/2"
(38mm)
C
L
1-3/8"
(35mm)
PLASTIC
TUB/SHOWER
SURROUND
Loading...