Page 1
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
CHATEAU® POSI-TEMP®
Single-Handle Tub/Shower Valve
Model: 2363
DESCRIPTION
• Chrome plated metal construction
• Pressure balancing cycle valve design with an adjustable temperature
limit stop
• 1/2" CC connections with 1/4 turn stops
• Includes showerhead, arm, flange and diverter tub spout
OPERATION
• Clear acrylic knob style handle
• Handle operates counterclockwise through a 270° arc with off at
6 o’clock and maximum hot at the 9 o’clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 2°
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet CSA B125.1, ASSE 1016, ASME A112.18.1,
and all applicable requirements referenced therein
WAR RA NTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
THIN WALL APPLICATION
THICK WALL APPLICATION
Rev. 2/11
There is more than 1 version of this model.
Page down to identify the version you have.
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
6.5" (165mm)
ESC. DIAM.
1/2" CC
2-13/16"(72mm) C.C.
4-1/2" (114mm)
PLASTER
FACE OF STUD
GROUND
OPENING
FLOOR LINE
1/2" MIN. CC (13mm)
5/8" MIN IPS (16mm)
2-1/2" MAX.
(63mm)
C
L
1-3/8"
(35mm)
Shower
45" (1143mm)/
48" (1219mm)
32" (813mm)
Tub/Shower and
Tub Only
6'-6"
(1981mm)
NOMINAL
DIAMETER
WALL
OPENING
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
FLOOR LINE
3/16"(typ) (5mm)
PLASTER GROUND
1-1/2"
(38mm)
C
L
1-3/8"
(35mm)
PLASTIC
TUB/SHOWER
SURROUND
Page 2
FOR MORE INFORMATION: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
CHATEAU® POSI-TEMP®
Single-Handle Tub/Shower Valve
Model: 2363
DESCRIPTION
• Chrome plated metal construction
• Pressure balancing cycle valve design with an adjustable temperature
limit stop
• 1/2" CC connections with 1/4 turn stops
• Includes showerhead, arm, flange and diverter tub spout
OPERATION
• Clear acrylic knob style handle
• Handle operates counterclockwise through a 270° arc with off at
6 o’clock and maximum hot at the 9 o’clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 2°
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet CSA B125.1, ASSE 1016, ASME A112.18.1,
and all applicable requirements referenced therein
WAR RA NTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
THIN WALL APPLICATION
THICK WALL APPLICATION
Rev. 11/03
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
7" (178mm)
ESC. DIAM.
1/2" CC
H
C
2-13/16"(72mm) C.C.
4-1/2" (114mm)
PLASTER
GROUND
OPENING
FLOOR LINE
FACE OF STUD
1/2" MIN. CC (13mm)
5/8" MIN IPS (16mm)
2-1/2" MAX.
(63mm)
C
L
1-3/8"
(35mm)
Shower
45" (1143mm)/
48" (1219mm)
32" (813mm)
Tub/Shower and
Tub Only
6'-6"
(1981mm)
NOMINAL
DIAMETER
WALL
OPENING
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
FLOOR LINE
3/16"(typ) (5mm)
PLASTER GROUND
1-1/2"
(38mm)
C
L
1-3/8"
(35mm)
PLASTIC
TUB/SHOWER
SURROUND
Loading...