Page 1
10-1/4" x 2-3/8"
(260mm x 60mm)
ESCUTCHEON
6-1/2"
(165mm)
14-3/8"
(365mm)
5-1/2"
(140mm)
8-3/8"
(213mm)
2-1/2" (63mm)
Max Deck Thickness
2-3/4"
(70mm)
2-3/4"
(70mm)
2-5/16"
(58mm)
6-9/16"
(167mm)
2-3/16"
(56mm)
1/2"
(13mm)
29-1/2"
(750mm)
ARBOR™
Single Handle High Arc
Pulldown Prep/Bar Faucet
Models: 5995 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 OR 3 HOLES, 1-1/2” (38mm) MIN. DIA.
Specifications
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Hydrolock® quick connect installation
• Pullout spray with 68" braided hose
• Flexible supply lines with 3/8" compression fittings
• High arc spout provides the perfect height and reach for prep sinks while the
pulldown feature provides infinite maneuverability for food preparation tasks
• 360˚ rotating spout provides ability to install handle on either side
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
• When filling a vessel outside the sink, the pause feature conveniently stops the
flow of water as the wand passes over the counter top
FLOW
• Flow is limited to 2.2. gpm (8.3 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including NSF 61/9
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Loading...