Page 1
COMMERCIAL
There is more than 1 version of this model.
Page down to identify the version you have.
SINK DESCRIPTION
• Manufactured of 20 gauge, nickel-bearing stainless steel
• Single bowl is 14" x 16" x 5-1/2"
• The sink ledge has two fixture mounting holes, 1-1/2" in diameter
located on each end of the sink
• Has one 3-1/2" diameter recessed drain opening
• Soundshield undercoating maximizes sound deadening
and inhibits condensation
• The exposed surfaces are polished to a lustrous satin tone finish
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 23-1/2" x 19-13/16", with a 3/8" corner radius,
a tolerance of plus or minus 1/16" is acceptable
STANDARDS
• Third party certified to meet ASME A112.19.3/CSA B45.4
and all applicable spec i fi ca tions referenced therein
WARRANTY
• Warranted for five years against material or manufacturing defects
(For sinks manufactured after 9/1/2016)
Spec i fi ca tions
Single Bowl Classroom Sink
Model: 22132
(C2417)
8-1/2"
(216mm)
6" (152mm)
TYP.
5-1/2"
(140mm)
BOWL
DEPTH
4"
(102mm)
1-1/2" DIA. TYP.
(38mm)
2-3/4" R. TYP.
(70mm)
C
L
16"
(406 mm) BOWL
24"
(610mm) LENGTH
3-1/2"
(89mm)
DIA. TYP.
12"
(305mm)
20-5/16"
(516mm)
14"
(356mm)
BOWL
2-1/2"
(64mm) TYP.
WIDTH
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"V" CHANNEL
SINK OVERALL DIMENSION
UNDERCOAT
CLAMP
Installation Detail
SEALANT MATERIAL
COUNTERTOP
SINK
Rev. 1/17
For sinks manufactured after 9/1/2016
CRITICAL DIMENSIONS
CRITICAL DIMENSIONS
CRITICAL DIMENSIONS
(DO NOT SCALE)
(DO NOT SCALE)
(DO NOT SCALE)
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
Page 2
COMMERCIAL
"V" CHANNEL
SINK DESCRIPTION
• Manufactured of 20 gauge, nickel-bearing stainless steel
• Single bowl is 14" x 16" x 5-1/2"
• The sink ledge has two fixture mounting holes, 1-1/2" in diameter
located on each end of the sink
• Has one 3-1/2" diameter recessed drain opening
• Soundshield undercoating maximizes sound deadening
and inhibits condensation
• The exposed surfaces are polished to a lustrous satin tone finish
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 23-1/2" x 16-1/2", with a 3/8" corner radius,
a tolerance of plus or minus 1/16" is acceptable
STANDARDS
• Third party certified to meet ASME A112.19.3/CSA B45.4
and all applicable spec i fi ca tions referenced therein
WARRANTY
• Warranted for five years against material or manufacturing defects
(For sinks manufactured before 9/1/2016)
Spec i fi ca tions
Single Bowl Classroom Sink
Model: 22132
(C2417)
8-1/2"
(216mm)
6" (152mm)
TYP.
5-1/2"
(140mm)
BOWL
DEPTH
4"
(102mm)
1-1/2" DIA. TYP.
(38mm)
2-3/4" R. TYP.
(70mm)
C
L
16"
(406 mm) BOWL
24"
(610mm) LENGTH
3-1/2"
(89mm)
DIA. TYP.
12"
(305mm)
17"
(432mm)
WIDTH
14"
(356mm)
BOWL
2-1/2"
(64mm) TYP.
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"V" CHANNEL
SINK OVERALL DIMENSION
UNDERCOAT
CLAMP
Installation Detail
SEALANT MATERIAL
COUNTERTOP
SINK
Rev. 1/17
For sinks manufactured before 9/1/2016
CRITICAL DIMENSIONS
CRITICAL DIMENSIONS
CRITICAL DIMENSIONS
(DO NOT SCALE)
(DO NOT SCALE)
(DO NOT SCALE)
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
Loading...