Page 1
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with a chrome plated finish
• 1/2" IPS connections
• Includes metal or 50/50 pop-up type waste assembly where
noted
• Red/Blue Hot/Cold Temperature markings on handle
OPERATION
• Pivot action lever style handle
• Temperature controlled through 100˚ degree arc
of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
and all applicable requirements referenced therein including
NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the
Federal Safe Drinking Water Act
•ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev 10/10
There is more than 1 version of this model.
Page down to identify the version you have.
CHATEAU®
Single-Handle Lavatory Faucet
with Metal Waste Assembly
Model: L4635 series
Bulk Pack Models (12 Per Carton):
L64635 series
Less Waste
Model: L4605 series
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3-1" DIA. HOLES, 2" ON CENTER
4"
(101mm)
DECK PLATE
1-3/4"
(45mm)
MAX.
1/2" IPS
ADAPTER
Lift
Rod
2"
(25mm)
6-1/8" (156mm)
ESCUTCHEON WIDTH
2"
(25mm)
TOP OF
MOUNTING
SURFACE
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
7" (178mm)
OPEN POSITION
2"
(51mm)
4-3/8"
(111mm)
2"
(51mm)
ESC.
WIDTH
Page 2
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CHATEAU®
Single-Handle Lavatory Faucet
with Metal Waste Assembly
Model: L4635 series
Bulk Pack Models (12 Per Carton):
L64635 series
With 50/50 Waste Assembly Bulk Pack:
L64603 series
L
ess Waste
Model: L4605 series
DESCRIPTION
• Metal construction with a chrome plated finish
• 1/2" IPS connections
• Includes metal or 50/50 pop-up type waste assembly where
noted
• Red/Blue Hot/Cold Temperature markings on handle
OPERATION
• Pivot action lever style handle
• Temperature controlled through 180˚ degree arc
of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel material
• Can accommodate reversed piping and back to
back installations
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
and all applicable requirements referenced therein including
NSF61/9
• Complies with California Proposition 65 and with the
Federal Safe Drinking Water Act
•ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev 10/10
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3-1" DIA. HOLES, 2" ON CENTER
6-5/8" (168mm)
OPEN POSITION
4"
(101mm)
DECK PLATE
1-3/4"
(45mm)
MAX.
1/2" IPS
ADAPTER
Lift
Rod
2"
(25mm)
6-1/8" (156mm)
ESCUTCHEON WIDTH
2"
(25mm)
TOP OF
MOUNTING
SURFACE
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
7" (178mm)
OPEN POSITION
2"
(51mm)
4-3/8"
(111mm)
2"
(51mm)
ESC.
WIDTH
Loading...