Page 1
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CHATEAU®
Single-Handle Lavatory Faucet
with Metal Waste Assembly
Models: CAL4621 series
Bulk Pack Models (12 Per Carton): CAL64620
series
with 50/50
Waste Assembly
Bulk Pack Model (12 Per Carton): CAL64621 series
L
ess Waste
Model: CAL4601 series
Bulk Pack Model (12 Per Carton):
CAL64601series
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal or 50/50 pop-up type waste assembly where
noted
OPERATION
• Pivot action lever style handle
• Temperature controlled through 180˚ degree arc of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel material
• Can accommodate reversed piping and back to back installations
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1
and all applicable requirements referenced therein including
NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with
the Federal Safe Drinking Water Act
•ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev 7/09
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3-1" DIA. HOLES, 2" ON CENTER
DECK PLATE
1-3/4"
(45mm)
MAX.
1/2" IPS
ADAPTER
Lift
Rod
2"
(25mm)
6-1/8" (156mm)
ESCUTCHEON WIDTH
2"
(25mm)
TOP OF
MOUNTING
SURFACE
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
2"
(51mm)
4-3/8"
(111mm)
(51mm)
ESC.
WIDTH
6-5/8" (168mm)
OPEN POSITION
2"
Loading...