Page 1
There is more than 1 version of this model.
C O M M E R C I A L
4"
(102mm)
2-1/8" max
(54mm)
6"
(152mm)
1-1/4"
(31mm)
3-1/2"
(89mm)
2-7/8"
(73mm)
6-1/2"
(164mm)
4-3/4"
(120mm)
Page down to identify the version you have.
FAUCET DESCRIPTION
• Chrome plated solid brass construction
• 4" centerset metering faucet
• Vandal resistant
OPERATION
• ADA compliant lever style handle with hot and cold indicators
• Cycle time easily adjusted from 5 to 60 seconds, independent
from water pressure
• Factory preset to automatically shut off after 10 seconds
• 1/2" IPS supply shanks
FLOW
• Vandal resistant 0.5 aerator gpm max limits water discharge to
a maximum of .25 gpc (.95 L/cycle) @ 30 seconds
CARTRIDGE
• 52100 brass shell cartridge
• Self contained metering mechanism which is
separate from the potable water supply
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1, and all
ap pli ca ble specifications referenced therein
ADA
• for lever handles
• CalGreen compliant
WARRANTY
• Warranted for 5 years against material
or manufacturing defects
Specifications
Two-Handle ADA Metering
Lavatory Faucet
Model: 8886 (Chrome)
NOTE: DESIGNED TO INSTALL THROUGH
2-1" MIN. DIA. HOLES. 4" ON CENTER
Rev. 5/12
CRITICAL DIMENSIONS
(DO NOT SCALE)
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
Page 2
C O M M E R C I A L
FAUCET DESCRIPTION
4"
(102mm)
2-1/8" max
(54mm)
6"
(152mm)
1-7/8"
(47mm)
4"
(101mm)
1-15/16"
(49mm)
7-1/4"
(184mm)
5-1/8"
(130mm)
• Chrome plated brass construction
• 4" centerset metering faucet
• Vandal resistant
OPERATION
• ADA compliant lever style handle with hot and cold indicators
• Metering mechanism is adjustable, to allow the installer to
compensate for supply line pressures of 20 to 80 psi.
• Cycle time easily adjusted from 5 to 60 seconds
• Factory preset to automatically shut off after 10 seconds at 80 psi
• 1/2" IPS supply shanks
FLOW
• Vandal resistant aerator limits water discharge to a
maximum of .25 gpc (.95 L/cycle) or .50 gpm
CARTRIDGE
• 16352 cartridge design
• Nonmetallic and nonferrous material
• Self contained metering mechanism which is
separate from the potable water supply
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1, and all
ap pli ca ble specifications referenced therein
ADA
• for lever handles
WARRANTY
• Warranted for 5 years against material
or manufacturing defects
Specifications
Two-Handle ADA Metering
Lavatory Faucet
Model: 8886 (Chrome)
NOTE: DESIGNED TO INSTALL THROUGH
2-1" MIN. DIA. HOLES. 4" ON CENTER
Rev. 5/10
CRITICAL DIMENSIONS
(DO NOT SCALE)
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
Loading...