Page 1
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Rev. 7/08
DESCRIPTION
• Chrome plated metal construction
• 1/2" IPS shanks
• Designed to be installed on 8" to 16" centers
OPERATION
• Knob style handles with interchangeable inserts.
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counter-
clockwise to close)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified by CSA to meet CSA B-125, ASME
A112.18.1M and all applicable requirements referenced
therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU®
Two-Handle Garden Tub Faucet
Model: 4902
NOTE: SPOUT INSTALLS THROUGH 1" MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE
There is more than 1 version of this model.
Page down to identify the version you have.
4" MIN. - 8" MAX.
(102mm) - (204mm)
ESCUTCHEON DIA.
2-1/8" (54mm)
8" (203mm) MIN.
16" (406mm) MAX.
4-1/2"
2-3/4"
(70mm)
1-1/4" (32mm)
MAX. DECK
THICKNESS
(114mm)
7"
(178mm)
5-17/32"
(140mm)
Page 2
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
• Chrome plated metal construction
• 1/2" IPS shanks
• Designed to be installed on 8" to 16" centers
OPERATION
• Knob style handles with interchangeable inserts.
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counter-
clockwise to close)
FLOW
• Stream straightener - nonrestricted flow
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified by CSA to meet CSA B-125, ASME
A112.18.1M and all applicable requirements referenced
therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU®
Two-Handle Garden Tub Faucet
Model: 4902
NOTE: SPOUT INSTALLS THROUGH 1" MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE
Rev. 1/97
2-7/8"(11mm)
HOT
INLET
8" (203mm) MIN.
16" (406mm) MAX.
4" (102mm) MIN.
ESC.
2-1/2"(64mm)
DIA.
COLD
INLET
FLEXIBLE
CONNECTORS
1-5/8"(41mm)
1-1/4" (32mm) MAX. DECK
5-1/8"
(130mm)
THICKNESS
Loading...