Moen L500 User Manual
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Colonnade®
Single Control Kitchen Faucet
w/Pullout Spray
Models: 7575 series
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/2” (38mm) DIA.
Rev. 2/11
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Wand with Hydrolock® quick connect system
• Pullout spray with 59" fiber hose
• Flexible supplies with 3/8” compression fittings
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Spout receptor rotation is 145˚
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 2.2 gpm (8.3 L/min) MAX
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
•
ADA for lever handle
WAR RA NTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
There is more than 1 version of this model.
Page down to identify the version you have.
9-5/8"
(244mm)
Deck Escutcheon
10-7/16" x 2-7/16" wide
(256mm x 62mm)
2-1/2" (63.5mm)
Max. Deck Thickness
Single Mount Esc.
9-5/8"
(244mm)
28-1/2"
(724mm)
7"
(178mm)
9-3/8"
(238mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/4” (32mm) DIA.
Colonnade™
Single Control Kitchen Faucet
w/Pullout Spray
Models: 7575 series
87575 series
Discontinued Models:
7575, 7575S, 7575CPR, 7575SL
87575, 87575C, 87575S, 87575,
87575W, 87575CPR
Rev. 2/08
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Wand with Hydrolock® quick connect system
• Pullout spray with 59" fiber hose
• 1/2" IPS connections will accept standard ball nose
connection for 3/8" tubing
• Liquid dispenser with 87575CSD only
OPERATION
• Lever style handle
• Temperature controlled by 180˚ arc of handle travel
• Spout receptor rotation is 145˚
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 2.2 gpm (8.3 L/min) MAX
CARTRIDGE
• 1225 cartridge design
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Designed and manufactured to comply with the requirements of:
CSA B-125.1, ASME A112.18.1, NSF 61 Section 9, California Proposition 65,
ICC A117.1, ADA
• The backflow protection system in this device consists of two independently
operating check valves, a primary and a secondary which prevent backflow.
• ADA for lever handle
WAR RAN TY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
3/8" (10mm)
Supply Tubes
1/2" IPS
Connection
9-5/8"
(244mm)
9-5/8"
(244mm)
9-3/8"
7"
(178mm)
(238mm)
3-7/16"
(88mm)
Deck Escutcheon
10-7/16" x 2-7/16" wide
(256mm x 62mm)
2" (25mm)
Max. Deck Thickness
Single Mount Esc.
Cold
Hot
Counter Weight
3 Hole, 4" o.c. Installation
Flexible
Fiber Hose
(406mm)
3"
(77mm)
16"
2"
(50mm)
9-7/8"
(250mm)
Loading...