Moen L224 User Manual

CRITICAL DIMENSIONS

(DO NOT SCALE)

Specifications

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

NOTE: THE INSTALLATION SHOWN IS FOR TILE DECKS, THIS VALVE WILL ALSO FIT STEEL, CAST IRON OR PLASTIC DECKS

DESCRIPTION

• Metal construction with various finishes identified by suffix

• Designed to be installed on built-up decks or on

finished surfaces up to 1-1/2" (38mm) thick.

• The tub fill spout is a slip fit design and the supplies are 1/2" copper tubing.

OPERATION

• Acrylic knob style handles

• Rotate either handle counterclockwise to open

(clockwise to close).

FLOW

• Designed to deliver 18 gpm (68 L/min).

CARTRIDGE

• Nonmetallic and stainless steel materials

STANDARDS

• Designed and manufactured to comply with the applicable

requirements of: CSA B-125 and ASME A112.18.1M and all applicable requirements referenced therein

WARRANTY

• Lifetime limited warranty against leaks, drips and

finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

SPOUT POST

INSTALLS THRU

7/8" (22mm) MINIMUM

DIAMETER HOLE

ESCUTCHEON

2-1/4" (mm)

1-1/2"

(38mm)MAX.

MOUNTING NUT

1/2"

COPPER

TUBING

1/2" COPPER

TEE

SPOUT POST

WASHER

VALVE BODY

INSTALLS THRU

1-3/16" MINIMUM

DIAMETER HOLE

INLET 1/2" COPPER TUBE SHANK

MOUNTING

NUT

BRACKET

1/2" COPPER TEE

(77mm)

(127mm)

4-1/2"

(115mm)

(179mm)

CHATEAU®

Two-Handle Garden Tub Valve and Trim

Model: 74942 series

Discontinued Model: 74943

Rev. 4/08