Moen L15LD400 User Manual

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• 1/2" IPS connections

• Includes hot and cold indicators

• Includes metal pop-up waste assembly
OPERATION

• Lever style handles

• Maximum handle rotation angle is 90˚ to full on for either handle

• Hot side counterclockwise to open (clockwise to close)

• Cold side clockwise to open (counterclockwise to close)
FLOW

• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,

for products made before October 2008 flow is limited to

2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1224 cartridge design

• Nonmetallic, nonferrous and stainless steel material
STANDARDS

• Third party certified to WaterSense,® CSA B125, ASME A112.18.1M,

ANSI A117.1and all applicable requirements referenced therein

• Certified to ANSI/NSF 61/9

• Complies with California Proposition 65 and with the Federal

Safe Drinking Water Act

•ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish

defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

Rev. 7/08

CRITICAL DIMENSIONS

(DO NOT SCALE)

Vestige™

Two Handle Centerset

Lavatory Faucet

Models: 6301 series

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED

THRU 3 HOLES, 1" (25mm) MIN. DIA.

Specifications

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

4"

(102mm)

4-1/8"

(104mm)

HOT

1/2" NPT

7-1/4"

(184mm)

2-7/8"

(73mm)

(126mm)

Escutcheon

2-1/2” x 6-5/16”

(63mm x160mm)

COLD

1/2" NPT

Lift Rod

5-5/8"

(142mm)

5"