Moen CSI2181 Specifications

Towel bar posts are constructed of

zinc. Bar is constructed of brass.

 DN8218BN – 18” Towe l Bar

Brushed Nickel Finish

 DN8224BN – 24” Towel Bar

Brushed Nickel Finish

Cleaning Instructions:

1. Position the mounting template on the w all in the desired location.

2. Using a level, align the template and tape it to the wall.

3. Drill two 5/16” holes at each mounting post location that corresponds to your
product. (We recommend using the horizontal holes for drywall installation).

4. Remove the template from the wall.

5. Fold ends of the plastic toggle together (see Figure 1) and insert into each hole
in the wall.

6. Lightly tap anchors until flush w ith the wall.

7. One at a time, insert plastic pin into each of the anchors and lightly tap to
activate anchor (see Figure 2). Remove pin and repeat on all anchors.

8. Remove mounting posts from the product assemblies by loosening each
setscrew .

9. One at a time, place each mounting post over anchors (notch facing downw ard)
and insert screws through post into anchors.

10. Tighten screws.

11. Assemble the towel bar and posts.

12. While assembled, position each end post w ith setscrews facing down and place
over both mounting posts. Tighten the setscrew at the bottom of each post.

Stock Number:_________________________Towel Bar
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

18” & 24” Towel Bar

DN8218 & DN8224

Wembley® Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

25300 AL MOEN DRI VE  NORTH OLMSTED, OH 44070
COR POR ATE H EADQUARTERS: [phone]  FAX: [phone]
IN TERN ATION AL: [phone]  FAX: [phone]
CU STOMER SERVI CE (U SA): 800-882-0116  FAX: [phone]
WW W.MOEN. COM

Copyright Creative Specialties International Literature #BA1332