25300 AL MOEN D RI VE NOR TH OLMSTED , OH 44070
COR PORATE H EADQU ARTERS: (800) 321-8809 F AX: (800) 848-6636
IN TER NATION AL: (440) 962-2000 FAX: (440) 962-2726
CU STOMER SERVI CE (USA): 80 0-882-0116 FAX: (888) 379-2720
WW W. MOEN .C OM
Copyright Creative Specialties International
Towel Bar posts are constructed of
zinc. Bar is aluminum.
YB2218BN – 18” Towel Bar
Brushed Nickel Finish
YB2224BN – 24” Towe l Bar
Brushed Nickel Finish
YB2218CH – 18” Towe l Bar
Chrome Finish
YB2224CH – 24” Towe l Bar
Chrome Finish
YB2218ORB – 18” Towel Bar
Oil Rubbed Bronze Finish
YB2224ORB – 24” Towel Bar
Oil Rubbed Bronze Finish
Cleaning Instructions:
Stock Number:______________________Towel Bar
By Creative Specialties
Materials:
Stock Numbers:
Dimensions:
18” & 24” Towel Bar
YB2218 & YB2224
Brantford™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1396
Directions below are for installation into drywall. If installing product into
a stud, use the wood screws only.
1. Mark the appropriate distance for your towel bar on the wall where
you want to install the product.
2. Use a level to ensure that the pilot holes will be perfectly level.
3. Using ¼” drill bit, drill one pilot hole for each post.
4. Position mounting posts to wall by inserting wall anchors into pilot
holes and pressing firmly. (Make sure that locking tab on mounting
post is facing down.)
5. Tighten wall anchor screw while holding mounting post firmly in place.
Tighten anchor until resistance increases. DO NOT over tighten.
6. Using tip of screw bit press wall spikes (metal pieces on outer edge of
mounting post) into drywall.
7. Towel bar must be attached to mounting posts as a unit – insert towel
bar into each post.
8. Attach posts by pressing firmly to mounting posts until it clicks. (The
square opening at the base of the post must be facing down to matchup with locking tab).
Installation Instructions:
Loading...