Moen CSI2174 Specifications

Towel Bars posts are die cast from

highest quality zinc alloy (zamac).
Rod is aluminum. Castings are triple
plated with a polished brass, polished
chrome, or matte pewter finish.

 DN8418PB – 18” Towel Bar

Polished Brass Finish
Concealed Screw Mounting
¾” Round Bar

 DN8418CH – 18” Towel Bar

Polished Chrome Finish
Concealed Screw Mounting
¾” Round Bar

 DN8418MPW – 18” Towel Bar

Matte Pewter Finish
Concealed Screw Mounting
¾” Round Bar

 DN8418BN – 18” Towel Bar

Brushed Nickel Finish
Concealed Screw Mounting
¾” Round Bar

 DN8424PB – 24” Towel Bar

Polished Brass Finish
Concealed Screw Mounting
¾” Round Bar

 DN8424CH – 24” Towel Bar

Polished Chrome Finish
Concealed Screw Mounting
¾” Round Bar

 DN8424MPW – 24” Towel Bar

Matte Pewter Finish
Concealed Screw Mounting
¾” Round Bar

 DN8424BN – 24” Towel Bar

Brushed Nickel Finish
Concealed Screw Mounting
¾” Round Bar

Cleaning Instructions:

25300 AL MOEN DRIVE  NORT H OLMST ED, OH 44070 (8 00 ) 32 1 -8809 
FAX: [phone]  INT ERNATIONAL: (44 0) 9 62 -2000 
FAX: [phone] CUSTOMER SERVICE (US A): 800-882 -0116
WWW.MOEN.COM
©Copyright Creati ve Sp eci alties Inte rnational Li tera ture #BA1047

1. Position the mounting template on the wall in the desired location. Using a

level, align the template and tape it to the wall.

2. Place each mounting plate on the template with “UP” facing you.

3. One at a time, place each anchor screw through the mounting plate,

centered in each large hole. Using a Phillips screwdriver, turn the anchor
screw while applying pressure. Screw will self drill and tap into drywall.
Do not over tighten.

4. Only insert screw ½ to ¾ of the way into wall.

5. After all screws are installed, tear the template away from the wall

6. Tighten all 4 screws. Do not over tighten.

7. Assemble the towel bar and posts.

8. While assembled, position each end post with the setscrew down and place

over both mounting plates. Tighten the setscrew at the bottom of each base.

Stock Number:______________________Towel Bar
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

18” & 24” Towel Bar

DN8418 & DN8424

Preston Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.