Page 1
25300 AL MOEN D RI VE NOR TH OLMSTED , OH 44070
COR PORATE H EADQU ARTERS: (800) 321-8809 F AX: (800) 848-6636
IN TER NATION AL: (440) 962-2000 FAX: (440) 962-2726
CU STOMER SERVI CE (USA): 800 -882-0116 FAX: (888) 379-2720
WW W. MOEN .C OM
Copyright Creative Specialties International
Towel bar posts are constructed of
zinc. Bar is aluminum.
DN4118BN – 18” Towel Bar
Brushed Nickel Finish
DN4124BN – 24” Towel Bar
Brushed Nickel Finish
Cleaning Instructions:
1. Position the mounting template on the wall in the desired location. Using a
level, align the template and tape it to the wall.
2. Place each mounting plate on the template.
3. One at a time, place each anchor screw through the mounting plate,
centered in the large hole. Using a Phillips screwdriver, turn the anchor
screw while applying pressure. Screw will self drill and tap into drywall.
4. Only insert screw ½ to ¾ into wall.
5. After all screws are installed, tear the template away from the wall
6. Tighten all 4 the screws. Do not over tighten.
7. Assemble the Towel bar and posts.
8. While assembled, Position each end post with the setscrew down and place
over mounting plate. Tighten the setscrew at the bottom of each base.
Stock Number:______________________Towel Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
18” & 24” Towel Bar
DN4118 & DN4124
Stockton® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1153
Length 18" 24"
Dim. A 18.00 24.00
Dim. B 23.03 29.03
Loading...