Drawer Pulls are constructed of zinc.
YB9807BN – Drawer Pull
Brushed Nickel Finish
YB9807CH – Drawer Pull
Chrome Finish
YB9807ORB – Drawer Pull
Oil Rubbed Bronze Finish
Cleaning Instructions:
25300 AL MOEN DR IVE NORTH OLMSTED , OH 44070
CORPORATE H EADQUARTER S: (800) 321-8809 F AX: (800) 848-6636
INTER NATI ON AL: (440) 962 -2000 FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 FAX: (888) 379 -2720
WWW . MOEN.C OM
Copyright Creative Specialties International Literature #BA1558
1. Drawer pulls will require two 3/16” holes.
2. The distance between holes is 3” on center.
3. Using a level, mark the location of the two holes.
4. Use a 3/16” drill bit to drill two holes.
5. Insert the screws into each hole.
6. Place the drawer pull over the screws.
7. Use a Phillips screwdriver to tighten screws.
Stock Number:______________________Drawer Pull
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Drawer Pull
YB9807
Waterhill® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Loading...