Moen CSI1969 Specifications

Drawer Pulls are constructed of zinc.

 YB5807BN – Drawer Pull

Brushed Nickel Finish

 YB5807CH – Drawer Pull

Chrome Finish

Cleaning Instructions:

1. Drawer pulls will require two 3/16” holes.

2. The distance between holes is 3” on center.

3. Using a level, mark the location of the two holes.

4. Use a 3/16” drill bit to drill two holes.

5. Insert the screws into each hole.

6. Place the drawer pull over the screws.

7. Use a Phillips screwdriver to tighten screws.

Stock Number:______________________Drawer Pull
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Drawer Pull

YB5807

Icon™ Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

25300 AL MOEN DR IVE  N ORTH OLMSTED , OH 44070
CORPORATE HEADQUARTER S: [phone]  F AX: [phone]
INTERNATI ONAL: (440) 962 -2000  F AX: [phone]
CUSTOMER SERVIC E (USA): 800-882-0116  F AX: [phone]
WWW .MOEN . COM

Copyright Creative Specialties International Literature #BA1564