Page 1
DN9186BN – Towel Ring
Brushed Nickel Finish
DN9186BRB – Towel Ring
Mediterranean Bronze Finish
DN9186CH – Towel Ring
Chrome Finish
25300 AL MOEN DR I VE NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 F AX: (800) 848-6636
INTER NATIONAL: (440) 962-2000 FAX: (440) 962-2726
CUSTOMER SER VICE (USA): 800 -882-0116 FAX: (888) 379-2720
WWW . MOEN.COM
Copyright Creative Specialties International Literature # BA1592
Towel Ring post is a die cast from
highest quality zinc alloy (Zamac).
Casting is plated in Chrome, Brushed
Nickel or Mediterranean Bronze.
Towel Ring is aluminum for Brushed
Nickel and Chrome finishes and
stainless steel for Mediterranean
Bronze.
Cleaning Instructions:
1. Remove mounting posts from the product assemblies by
loosening each setscrew.
2. Position the mounting plate on the wall at desired location with
“UP” facing you. Mark hole locations.
3. Drill 2 holes as marked using 5/16” drill bit.
4. Fold ends of the plastic toggle anchor together and insert into
each hole in the wall.
5. Lightly tap anchors until flush with the wall.
6. One at a time, insert plastic pin into each anchor and lightly tap to
activiate anchor. Remove pin and repeat on other anchor.
7. Place the mounting plate on the wall over the installed wall
anchors with “UP” facing you.
8. Tighten screws.
9. Place decorative product over the mounting plate with the
setscrew facing down. Tighten setscrew.
Stock Number:______________________Towel Ring
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
DN9186
Ellsworth Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Loading...