Moen CSI1939 Specifications

25300 AL MOEN D RI VE  NOR TH OLMSTED , OH 44070
COR PORATE H EADQU ARTERS: [phone]  F AX: [phone]
IN TER NATION AL: [phone]  FAX: [phone]
CU STOMER SERVI CE (USA): 800 -882-0116  FAX: [phone]
WW W. MOEN .C OM

Copyright Creative Specialties International Literature #BA1475

1. Remove the mounting bracket from the body by loosening the setscrew.

2. Position the assembled unit on the wall where desired.

3. Lightly mark the outline of each base.

4. Center a mounting bracket within each base outline with “UP” facing
you.

5. Mark the 2 large hole locations of each mounting bracket.

6. Attach each mounting bracket to the wall, using the wall anchors
provided

7. Mount each base on the corresponding mounting bracket. Check and
make sure that the base set screw hole(s) are facing down. Assemble a
set screw to each base. Use the allen wrench included in hardware kit
to tighten each set screw and secure the assembly to the mounting
bracket(s).

Robe Hook is constructed of zinc.

 YB8803BN – Robe Hook

Brushed NickelFinish

 YB8803CH – Robe Hook

Chrome Finish

Cleaning Instructions:

Stock Number:______________________Robe Hook

By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Robe Hook

YB8803

90°™ Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.