1. Cabinet knobs will require one 3/16” hole.
2. Mark the location of the hole.
3. Use a 3/16” drill bit to drill hole.
4. Insert the screw into the hole.
5. Place the knob over the screw.
6. Use a Phillips screwdriver to tighten screw.
25300 AL MOEN DRI VE NORTH OLMSTED , OH 44070
CORPORATE H EAD QUARTER S: (800) 321-8809 F AX: (800) 848-6636
INTERNATI ON AL: (440) 962-2000 FAX: (440) 962-2726
CUSTOMER SERVICE (U SA): 800 -882-0116 F AX: (888) 379-2720
WWW .MOEN. C OM
Copyright Creative Specialties International Literature #BA1561
Cabinet Knobs are constructed of
zinc.
YB8205BN – Robe Hook
Brushed Nickel Finish
YB8205CH – Robe Hook
Chrome Finish
YB8205ORB – Robe Hook
Oil Rubbed Bronze Finish
Cleaning Instructions:
Stock Number:______________________Cabinet Knob
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Cabinet Knob
YB8205
Rothbury™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Loading...