Page 1
Y3186BN – Towel Ring
Brushed Nickel Finish
Y3186BRB – Towel Ring
Mediterranean Bronze Finish
Y3186CH – Towel Ring
Chrome Finish
25300 AL MOEN DRIVE N ORTH OLMSTED, OH 44070
CORPORATE HEADQUAR TER S: (800) 321-8809 F AX: (800) 848-6636
INTERNATION AL: (440) 962-2000 FAX: (440) 962-2726
CUSTOMER SERVI C E (USA): 800-882-0116 FAX: (888) 379-2720
WWW.MOEN.C OM
Copyright Creative Specialties International Literature # BA1536
Towel Ring post is die cast from
highest quality zinc alloy (Zamac).
Casting is plated in Chrome, Brushed
Nickel or Mediterranean Bronze.
Towel Ring is aluminum for Chrome
and Brushed Nickel finishes and
Stainless Steel for Mediterranean
Bronze.
Cleaning Instructions:
1. Remove mounting plate from hardware pack.
2. Position the mounting plate on the w all at desired location w ith “UP”
facing you. Mark hole locations.
3. Drill 2 holes as marked using 5/16” drill bit.
4. Fold ends of the plastic toggle anchor together and insert into each hole
in the wall.
5. Lightly tap anchors until flush with the wall.
6. One at a time, insert plastic pin into each anchor and lightly tap to activate
anchor. Remove pin and repeat on other anchor.
7. Place the mounting plate on the wall over the installed wall anchors w ith
“UP” facing you.
8. Tighten screws.
9. Place decorative product over the mounting plate w ith setscrew facing
down and tighten setscrew.
Stock Number:________________________Towel Ring
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
Y3186
Lindale™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Loading...