Moen CSI1577 Specifications

 Y3122BN – 24” Double Towel

Bar

Brushed Nickel Finish

 Y3122BRB – 24” Double

Towel Bar

Mediterranean Bronze Finish

 Y3122CH – 24” Double Towel

Bar

Chrome Finish

25300 AL MOEN DRIVE  NORTH OLMSTED, OH 44070
COR POR ATE HEAD QUAR TERS: [phone]  FAX: [phone]
IN TERN ATI ON AL: (440) 96 2-2000  FAX: [phone]
CU STOMER SER VI CE (USA): 800 -882-0116  F AX: [phone]
WWW.MOEN. COM

Copyright Creative Specialties International Literature # BA1532

Double Towel Bar post is die cast
from highest quality zinc alloy
(Zamac). Casting is plated in
Chrome, Brushed Nickel or
Mediterranean Bronze. Towel Bar is
aluminum for Chrome and Brushed
Nickel finishes and Stainless Steel for
Mediterranean Bronze.

Cleaning Instructions:

1. Position the mounting template on the w all in the desired location.

2. Using a level, align the template and tape it to the w all.

3. Drill tw o 5/16” holes at each mounting post location that corresponds to
your product.

4. Remove the template from the wall.

5. Fold ends of the plastic toggle together and insert into each hole in the
wall.

6. Lightly tap anchors until flush with the w all.

7. One at a time, insert plastic pin into each of the anchors and lightly tap to
activate anchor. Remove pin and repeat on all anchors.

8. Remove mounting posts from the product assemblies by loosening each
setscrew .

9. Place the mounting plate on the wall over the installed wall anchors w ith
“UP” facing you.

10. Insert screw s through the mounting plate into the anchors. Tighten the
screws.

11. Assemble the towel bar and posts.

12. While assembled, position each end post w ith setscrews facing dow n and
place over both mounting posts. Tighten the setscrew at the bottom of
each post.

Stock Number:_______________ 24” Double Towel Bar
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

24” Double Towel Bar

Y3122

Lindale™ Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.