Moen CSI1487 Specifications

Tank Levers are constructed of zinc.

 YB5101BN – Decorative Tank

Lever

Brushed Nickel Finish

 YB5101CH – Decorative Tank

Lever

Chrome Finish

 YB5101ORB – Decorative

Tank Lever

Oil Rubbed Bronze Finish

Cleaning Instructions:

25300 AL MOEN DRIVE  NOR TH OLMSTED, OH 44070
COR PORATE HEAD QUAR TER S: [phone]  F AX: [phone]
IN TER NATION AL: [phone]  FAX: [phone]
CU STOMER SER VICE (USA): 800 -882-0116  FAX: [phone]
WW W. MOEN .C OM

Copyright Creative Specialties International Literature #BA1618

1. Remove existing tank lever.

2. Remove the arm mechanism from the new tank lever by loosening nut.

3. Unscrew the tank nut. The thread for the tank nut is a left handed thread.

4. Position the new tank lever through the tank hole. The tank lever handle
should be pointing away from the toilet bowl.

5. Tighten nut. Depending on the curvature of the tank, there might be a slight
hap between the outside of the tank and the base of the lever.

6. Place the arm mechanism of the tank lever post. Adjust the arm up or down
as needed. Tighten nut to secure the arm in place.

7. Adjust the arm mechanism from side to side as needed. Make sure the arm
does not come into contact with the tank wall or the flush mechanism.
Tighten screw (A) to lock the arm in place.

8. Attach the flapper valve chain to one of the provided slots on the arm. Be
sure to eliminate any slack in the chain.

9. Make sure no water is leaking through the flapper w hen the handle is in its

normal position (not flushing). If it is, adjust the arm as needed.

Stock Number:______________________Tank Lever
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Decorative Tank Lever

YB5101

Voss™ Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.