Moen CSI1475 Specifications

Tank Lever is constructed of zinc hub

and handle. Arm mechanism is brass.

 YB8401BN – Tank Lever

Brushed Nickel Finish

 YB8401CH – Tank Lever

Chrome Finish

 YB8401ORB – Tank Lever

Oil Rubbed Bronze Finish

 YB8401NL – Tank Lever

Polished Nickel Finish

Cleaning Instructions:

1. Remove existing tank lever.

2. Remove the brass arm mechanism from the new tank lever by loosening screw A.

3. Position the new tank lever through the flush tank hole.

4. The tank lever handle should be pointing away from the toilet bowl.

5. Install the brass nut inside the tank and tighten. Depending on the curvature of
the tank, there might be a slight gap betw een the outside of the tank and the base
of the lever.

6. Loosen, but do not remove screw B on the arm mechanism.

7. Replace the entire brass arm mechanism onto the tank lever.

8. Tighten screw A.

9. Adjust the brass arm mechanism so it does not come in contact w ith the tank w all
or any part of the flush mechanism parts inside the tank.

10. Tighten the adjustment screw (screw B) on the brass arm mechanism.

11. Attach the flapper valve chain to one of the three holes provided on the brass arm.

12. Make sure that the arm does not activate, and no w ater is leaking thru the flapper
valve when the handle is in its normal position, (not flushing).

Stock Number:________________________Tank Lever
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Tank Lever

YB8401

Weymouth® Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

25300 AL MOEN D RIVE  NORTH OLMSTED , OH 44070
COR POR ATE HEADQUARTER S: (800) 321 -8809  FAX: [phone]
IN TERN ATIONAL: (440) 962 -2000  FAX: [phone]
CU STOMER SER VI CE (USA): 800-882 -0116  FAX: [phone]
WW W.MOEN .COM

Copyright Creative Specialties International Literature #BA1538