Paper Holder post is die cast from
highest quality zinc alloy (zamac).
Castings are triple plated with a
polished brass, polished chrome, or
matte pewter finish.
DN8408PB – Paper Holder
Polished Brass Finish
Concealed Screw Mounting
DN8408CH – Paper Holder
Polished Chrome Finish
Concealed Screw Mounting
DN8408MPW – Paper Holder
Matte Pewter Finish
Concealed Screw Mounting
DN8408BN – Paper Holder
Brushed Nickel Finish
Concealed Screw Mounting
Cleaning Instructions:
253 00 AL M OEN DRIVE NORTH OL MSTED, OH 44070 (800) 321 -8809
FAX: (800) 848 -6636 INTERNAT IONAL: (440) 962-2000
FAX: (440) 962 -2 726 CUSTOMER SERVICE (USA): 8 00 -882-0116
WWW.M OEN.COM
©Cop yri ght Crea tive Spe cialti es International Li terature #BA1046
1. Pos ition the mounting plate on the wall at desired location with “UP” facing
you.
2. One at a time, place each anchor screw through the mounting plate, centered
in each large hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall. Do not over
tighten.
3. Place assembly over the mounting post, setscrew facing down.
4. Tighten setscrew.
Stock Number:______________________Paper Holder
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Paper Holder
DN8408
Preston Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Loading...