Moen CSI1376 Specifications

25300 AL MOEN D RI VE  NOR TH OLMSTED , OH 44070
COR PORATE H EADQU ARTERS: [phone]  F AX: [phone]
IN TER NATION AL: [phone]  FAX: [phone]
CU STOMER SERVI CE (USA): 800 -882-0116  FAX: [phone]
WW W. MOEN .C OM

Copyright Creative Specialties International Literature #BA1571

Robe Hook is constructed of zinc.

 YB2403BN – Robe Hook

Brushed Nickel Finish

 YB2403CH – Robe Hook

Chrome Finish

Cleaning Instructions:

This product features the Pro+Fit Installation Mounting System. If
you do not have the Pro+Fit Installation Template please use the
following instructions. (Note: only one hole is required per
mounting post.)

1. Mark on the wall where you want to install the product.

2. Using ¼” drill bit, drill one pilot hole for post.

3. Position the mounting post to wall by inserting wall anchor into
pilot hole and pressing firmly

4. Make sure that locking tab on mounting post is facing down (6
o’clock).

5. Tighten wall anchor screw while holding mounting post firmly in
place. DO NOT over tighten.

6. Using tip of screw bit press wall spikes (metal pieces on outer
edge of mounting post) into drywall.

7. Attach post by pressing firmly to mounting post until it clicks.
(The square opening at the base of the post must be facing
down to match-up with locking tab.)

Stock Number:______________________Robe Hook
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Robe Hook

YB2403

Method™ Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.