Towel Bar
is
constructed of zinc.
Y2618BN
–
18” Towel Bar
Cleaning Instructions:
base.
Stock Number:
______________________
Towel Bar
Materials:
Installation Instructions:
Dimensions:
Banbury™ Technical Specification
18” & 24” Towel Bars
Stock Numbers:
q
Brushed Nickel Finish
q Y2624BN – 24” Towel Bar
Brushed Nickel Finish
q Y2618CH – 18” Towel Bar
Chrome Finish
q Y2624CH – 24” Towel Bar
Chrome Finish
Y2618 & Y2624
1. Position the mounting template on the wall in the desired location.
Using a level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the setscrew.
3. Place each mounting post on the template.
4. Drill 1/4" holes at the center of each oval marked location.
5. Remove the template from the wall and insert the wall anchors
(provided) into each drilled hole.
6. Place the mounting plate on the wall over the installed wall anchors.
Insert screws through the mounting plate into the anchors. Tighten the
screws.
7. Assemble the towel bar and posts.
8. While assembled, position each end post with the setscrew down and
place over mounting post. Tighten the setscrew at the bottom of each
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
By Creative Specialties
25300 AL MOEN DRIVE •NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 • FAX: (800) 848-6636
INTERNATIONAL: (440) 962-2000 • FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: (888) 379-2720
WWW.SHOWHOUSE.MOEN.COM
Copyright Creative Specialties International Literature # BA1442
Loading...