Moen CSI1250 Banbury Pivoting Paper Holder Specification Sheet

Page 1
Paper Holder
is constructed of zinc.
Y2608BN
Pivoting
Paper Holder
Cleaning Instructions:
Stock Number:
______________________
Paper Holder
Materials:
Installation Instructions:
Dimensions:
Banbury™ Technical Specification
base.
Pivoting Paper Holder
Stock Numbers:
q
Brushed Nickel Finish
q Y2608CH – Pivoting Paper Holder
Chrome Finish
Y2608
1. Position the mounting template on the wall in the desired location. Using a level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the setscrew.
3. Place each mounting post on the template.
4. Drill 1/4" holes at the center of each oval marked location.
5. Remove the template from the wall and insert the wall anchors (provided) into each drilled hole.
6. Place the mounting plate on the wall over the installed wall anchors. Insert screws through the mounting plate into the anchors. Tighten the screws.
7. Assemble the paper holder and posts.
8. While assembled, position each end post with the setscrew down and place over mounting post. Tighten the setscrew at the bottom of each
To preserve the fine finish of this product, clean only with a soft damp cloth. Dry well. Do not use commercial or abrasive cleaners.
By Creative Specialties
25300 AL MOEN DRIVE •NORTH OLMSTED, OH 44070 CORPORATE HEADQUARTERS: (800) 321- 8809 FAX: (800) 848-6636 INTERNATIONAL: (440) 962-2000 FAX: (440) 962-2726 CUSTOMER SERVICE (USA): 800-882-0116 FAX: (888) 379-2720 WWW.SHOWHOUSE.MOEN.COM
Loading...