Moen CSI1231 Specifications

Towel Ring post is die cast from

highest quality zinc alloy (zamac).
Castings are triple plated with a
polished brass, polished chrome, or
matte pewter finish.

 DN8486PB – Towel Ring

Polished Brass Finish
Concealed Screw Mounting

 DN8486CH – Towel Ring

Polished Chrome Finish
Concealed Screw Mounting

 DN8486MPW – Towel Ring

Matte Pewter Finish
Concealed Screw Mounting

 DN8486BN – Towel Ring

Brushed Nickel Finish
Concealed Screw Mounting

Cleaning Instructions:

25300 AL MOEN DRIVE  NORT H OLMST ED, OH 44070 (8 00 ) 32 1 -8809 
FAX: [phone]  INT ERNATIONAL: (44 0) 962-2000 
FAX: [phone] CUSTOMER SERVICE (USA): 800-882-0116
WWW.MOEN.COM
©Copyright Creati ve Sp eci alties Inte rnational Li te ratu re #BA1050

1. Pos ition the mounting plate on the wall at desired location with “UP”

facing you.

2. One at a time, place each anchor screw through the mounting plate,

centered in each large hole. Using a Phillips screwdriver, turn the anchor
screw while applying pressure. Screw will self drill and tap into drywall.
Do not over tighten.

3. Place assembly over the mounting post, setscrew facing down.

4. Tighten setscrew.

Stock Number:______________________Towel Ring
By Creative Specialties International

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Towel Ring

DN8486

Preston Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.