Moen CSI1227 Specifications

Robe Hook is die cast from highest

quality zinc alloy (zamac). Castings
are triple plated with a polished
brass, polished chrome, or matte
pewter finish.

 DN8403PB – Robe Hook

Polished Brass Finish
Concealed Screw Mounting

 DN8403CH – Robe Hook

Polished Chrome Finish
Concealed Screw Mounting

 DN8403MPW – Robe Hook

Matte Pewter Finish
Concealed Screw Mounting

 DN8403BN – Robe Hook

Brushed Nickel Finish
Concealed Screw Mounting

Cleaning Instructions:

25300 AL MOEN DRIVE  NORT H OLMST ED, OH 4 40 70 (80 0) 3 21 -8809 
FAX: [phone]  INTERNAT IONAL: (440) 9 62 -2000 
FAX: [phone] CUST OM ER SERVICE (USA): 800 -882-0116
WWW.MOEN.COM
©Copyri gh t Cre ative Special ti es International Li terature #BA1045

1. Pos ition the mounting plate on the wall at des ired location with “UP”

facing you.

2. One at a time, place each anchor screw through the mounting plate,

centered in each large hole. Using a Phillips screwdriver, turn the anchor
screw while applying pressure. Screw will self drill and tap into drywall.
Do not over tighten.

3. Place assembly over the mounting post, setscrew facing down.

4. Tighten setscrew.

Stock Number:______________________Robe Hook
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Robe Hook

DN8403

Preston Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.