Moen CSI1225 Specifications

Glass Shelf posts are constructed of

zinc. Shelf is tempered glass.

 DN8390BN – Glass Shelf

Brushed Nickel Finish

 DN8390CH – Glass Shelf

Chrome Finish

Cleaning Instructions:

1. Position the mounting template on the w all in the desired location.

2. Using a level, align the template and tape it to the wall.

3. Drill two 5/16” holes at each mounting post location that corresponds to your
product. (We recommend using the horizontal holes for drywall installation).

4. Remove the template from the wall.

5. Fold ends of the plastic toggle together (see Figure 1) and insert into each hole
in the wall.

6. Lightly tap anchors until flush with the wall.

7. One at a time, insert plastic pin into each of the anchors and lightly tap to
activate anchor (see Figure 2). Remove pin and repeat on all anchors.

8. Remove mounting posts from the product assemblies by loosening each
setscrew .

9. One at a time, place each mounting post over anchors (notch facing downward)
and insert screws through post into anchors.

10. Tighten screws.

11. Remove the accent cap from both assemblies by loosening the setscrew s.
Reassemble each end with glass shelf between both washers and the accent
cap at the top. Tighten the setscrews.

12. Place assembly over the mounting posts w ith setscrew s facing down. Tighten
both setscrews.

Stock Number:______________________Glass Shelf
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Glass Shelf

DN8390

Retreat® Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

25300 AL MOEN DR I VE  NOR TH OLMSTED , OH 44070
COR PORATE H EADQU ARTERS: [phone]  F AX: [phone]
IN TER NATION AL: [phone]  F AX: [phone]
CU STOMER SERVI CE (USA): 800 -882-0116  FAX: [phone]
WW W. MOEN .C OM

Copyright Creative Specialties International Literature #BA1329