
Glass Shelf posts are constructed of
zinc. Shelf is tempered glass.
DN7790BN – Glass Shelf
Brushed Nickel Finish
DN7790CH – Glass Shelf
Chrome Finish
25300 AL MOEN DR IVE NOR TH OLMSTED, OH 44070
COR POR ATE HEAD QU ARTERS: (800) 321 -8809 F AX: (800) 848-6636
IN TERN ATI ONAL: (440) 962-2000 FAX: (440) 962-2726
CU STOMER SER VI CE (USA): 800-882-0116 FAX: (888) 379-2720
WW W.MOEN. COM
Copyright Creative Specialties International Literature #BA1317
1. Position the mounting template on the w all in the desired location.
2. Using a level, align the template and tape it to the w all.
3. Drill tw o 5/16” holes at each mounting post location that corresponds to your
product.
4. Remove the template from the wall.
5. Fold ends of the plastic toggle together (see Figure 1) and insert into each hole
in the wall.
6. Lightly tap anchors until flush with the wall.
7. One at a time, insert plastic pin into each of the anchors and lightly tap to
activate anchor (see Figure 2). Remove pin and repeat on all anchors.
8. Remove mounting posts from the product assemblies by loosening each
setscrew .
9. One at a time, place each mounting post over anchors (notch facing downward)
and insert screws through post into anchors.
10. Tighten screws.
11. Unscrew the top accent cap from both assemblies. Reassemble with washer
between the glass shelf and the top accent cap.
12. Place assembly over the mounting posts w ith setscrews facing down. Tighten
both setscrews.
Stock Number:______________________Glass Shelf
By Creative Specialties
Installation Instructions:
Lounge™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.