Moen CSI1210 Specifications

Paper Holder is constructed of zinc.

 DN7708BN – Paper Holder

Brushed Nickel Finish

 DN7708CH – Paper Holder

Chrome Finish

Cleaning Instructions:

1. Remove mounting post from product assembly by loosening the setscrew .

2. Position the mounting post on the wall at desired location with notch facing
downw ard, and mark both horizontal hole locations.

3. Drill 2 holes as marked using 5/16” drill bit.

4. Fold ends of the plastic toggle anchor together (see Figure 1) and insert into
each hole in the wall.

5. Lightly tap anchors until flush with the w all.

6. One at a time, insert plastic pin into each anchor and lightly tap to activate
anchor (see Figure 2). Remove pin and repeat on other anchor.

7. Place mounting post over anchors w ith notch facing downward, and insert
screws through post into anchors.

8. Tighten screw s.

9. Place assembly over the mounting post with setscrew facing down and tighten
setscrew .

Stock Number:______________________Paper Holder
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Paper Holder

DN7708

Lounge™ Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

25300 AL MOEN D RIVE  NOR TH OLMSTED , OH 44070
CORPOR ATE HEAD QU AR TERS: (800) 321 -8809  FAX: [phone]
IN TERNATIONAL: (440) 962 -2000  F AX: [phone]
CU STOMER SER VIC E (USA): 800-882-0116  FAX: [phone]
WW W.MOEN .COM

Copyright Creative Specialties International Literature #BA1313