Moen CSI1200 Specifications

Towel bar posts are constructed of

zinc. Bar is constructed of brass.

 DN6822BN – 24” Double Towel Bar

Brushed Nickel Finish

Cleaning Instructions:

1. Position the mounting template on the wall in the desired location. Using a

level, align the template and tape it to the wall.

2. Remove each mounting post from the body by loosening the setscrew.

3. Place each mounting post on the template with notch facing down.

4. One at a time, place each anchor screw through the mounting post, centered in

the large hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall.

5. Only insert screw ½ to ¾ of the way.

6. After all screws are installed, tear the template away from the wall.

7. Tighten all 4 the screws. Do not over tighten.

8. Assemble the Towel bar and posts.

9. While assembled, Position each end post with the setscrew down and place
over mounting posts. Tighten the setscrew at the bottom of each base.

Stock Number:__________________ Double Towel Bar
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

24” Double Towel Bar

DN6822

Sage® Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

25300 AL MOEN DRI VE  N OR TH OLMSTED, OH 44070
COR PORATE HEAD QU ARTER S: (800) 321 -8809  F AX: [phone]
IN TER N ATI ON AL: [phone]  FAX: [phone]
CU STOMER SERVI CE (U SA): 800 -882-0116  F AX: [phone]
WW W. MOEN. COM

Copyright Creative Specialties International Literature #BA1269