Page 1
Triple Robe Hook is die cast from
highest quality zinc alloy (zamac).
Castings are triple plated in a
polished brass, polished chrome or
combination chrome and brass finish,
or powder coated in white finish.
7603BN – Triple Robe Hook
Brushed Nickel Finish
Exposed Screw Mounting
7603CH – Triple Robe Hook
Polished Chrome Finish
Exposed Screw Mounting
7603CB – Triple Robe Hook
Chrome & Brass Finish
Exposed Screw Mounting
7603W – Triple Robe Hook
White Finish
Exposed Screw Mounting
7603OWB – Triple Robe Hook
Old World Bronze Finish
Exposed Screw Mounting
Cleaning Instructions:
25300 AL M OEN DRIVE NORT H OLMSTED, OH 44070 (80 0 ) 321 -8809
FAX: (800) 848-6636 INT ERNAT IONA L: (440) 962-2000
FAX: (440) 962-2726 CUST OMER SERVICE (USA): 800-882-0116
WWW.MOEN.COM
©Copyright Creative Specialties Inte rnati onal Literature #BA1070
1. Position unit on wall in desired location.
2. Mark hole positions. Drill starter holes.
3. Mount hook with 1 ¼” screws (provided).
Note: Wood blocking is preferable behind all wall surfaces.
If wood blocking is not available, the following optional fasteners are
suggested: Tile/Masonry – Plastic or Lead Anchors; Plaster/Drywall –
Toggle Bolts
Stock Number:______________________Robe Hook
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Robe Hook
7603
Yorkshire Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Loading...