Paper Holder
posts are die cast from
5308PB
–
Paper Holder
Cleaning Instructions:
1. Position the mounting template on the wall in the desired location. Using a
Stock Number:
______________________Paper Holder
Materials:
Installation Instructions:
Dimensions:
Yorkshire Technical Specification
Paper Holder
Stock Numbers:
q
Polished Brass Finish
Concealed Screw Mounting
Matching Roller
q 5308CH (BP5308CH) – Paper Holder
Polished Chrome Finish
Concealed Screw Mounting
Matching Roller
q 5308CB (BP5308CB) – Paper Holder
Chrome & Brass Finish
Concealed Screw Mounting
Matching Chrome Roller
q BP5308SN – Paper Holder
Satin Nickel Finish
Concealed Screw Mounting
Matching Chrome Roller
“BP” skus in wholesale packaging
5308
highest quality zinc alloy (zamac).
Castings are triple plated in a
polished brass, polished chrome or
combination chrome and brass finish.
Roller is plated plastic and spring
loaded.
level, align the template and tape it to the wall.
2. Place each mounting plate on the template with “UP” facing you.
3. One at a time, place each anchor screw through the mounting plate, centered
in each large hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall. Do not over
tighten.
4. Only insert screw ½ to ¾ of the way into wall.
5. After all screws are installed, tear the template away from the wall
6. Tighten all 4 screws. Do not over tighten.
7. Position each end post with the setscrew down and place over mounting
plate. Tighten the setscrew at the bottom of each base.
8. Compress the paper holder bar and place into both post holes.
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
By CSI Bath Furnishings
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 (800) 321-8809 •
FAX: (800) 848-6636 • INTERNATIONAL: (440) 962-2000 •
Copyright CSI Bath Furnishing Division of Moen 02/22/01
Literature #BA1071
Loading...