Moen CSI1094 Installation & Assembly

Curved shower rod

is made of .028

2-102-5PS –

5’

Curved Shower Rod Only

Stock Number:

_____________

___

____

Curved

Shower Rod

Materials:

Installation Instructions:

Dimensions:

Technical Specification
Curved Shower Rod

Stock Numbers:

q

Polished Stainless Steel Finish
1” Diameter Rod

q 2-102-5BS – 5’ Curved Shower Rod Only

Brushed Stainless Steel Finish
1” Diameter Rod

q 65-F-PS – Curved Shower Rod Flange Kit

Polished Stainless Steel Finish
Concealed Screw Mounting
Two Assemblies per Set
Mounting Hardware included for installation
into wood, drywall or tile

q 65-F-BS – Curved Shower Rod Flange Kit

Brushed Stainless Steel Finish
Concealed Screw Mounting
Two Assemblies per Set
Mounting Hardware included for installation
into wood, drywall or tile

Note: To order a complete curved shower
rod unit, select both a rod and a flange kit.

2-102-5 & 65-F

(22 gauge) seamless type 304
stainless steel. Flanges are stamped
from stainless steel.

The Donner curved shower rod should be mounted in the same position that
you would mount a straight shower rod.

1. Mount the first wall plate using the appropriate supplied hardware
(post should be facing outside the shower).

2. With the fronts of the 2 covers facing together, slide the covers onto
the rod.

3. With curve facing downward, slide rod onto the mounted wall plate.

4. Slide 2nd wall plate onto the open end of the rod and rotate entire
unit upward so that the curve is facing outside of the shower.

5. Mount second wall plate and snap covers into place on each end of
the rod.

Refer to the instruction sheet in each package for complete installation
instructions and illustrations.
Note: Wood blocking is preferable behind all wall surfaces. If wood blocking
is not available, use the appropriate anchor supplied in the hardware kit.

By Creative Specialties

25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.CSI.MOEN.COM

Copyright Creative Specialties International 2005