Moen CSI1068 Specifications

Towel bar posts are constructed of
zinc. CH bar is aluminum. BN &
ORB bar is brass.

 DN6818CH – 18” Towel Bar

Chrome Finish

 DN6824CH – 24” Towel Bar

Chrome Finish

 DN6818BN – 18” Towel Bar

Brushed Nickel Finish

 DN6824BN – 24” Towel Bar

Brushed Nickel Finish

 DN6818ORB – 18” Towel Bar

Oil Rubbed Bronze Finish

 DN6824ORB – 24” Towel Bar

Oil Rubbed Bronze Finish

Cleaning Instructions:

1. Position the mounting template on the wall in the desired location. Using a

level, align the template and tape it to the wall.

2. Remove each mounting post from the body by loosening the setscrew.

3. Place each mounting post on the template with notch facing down.

4. One at a time, place each anchor screw through the mounting post, centered

in the large hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall.

5. Only insert screw ½ to ¾ of the way.

6. After all screws are installed, tear the template away from the wall.

7. Tighten all 4 the screws. Do not over tighten.

8. Assemble the Towel bar and posts.

9. While assembled, Position each end post with the setscrew down and place
over mounting posts. Tighten the setscrew at the bottom of each base.

Stock Number:______________________Towel Bar
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

18” & 24” Towel Bar

DN6818 & DN6824

Sage® Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Length 18" 24"

Dim. A 18.00 24.00
Dim. B 20.38 26.38

25300 AL MOEN DRI VE  N OR TH OLMSTED, OH 44070
COR PORATE HEADQU AR TER S: (800) 321 -8809  F AX: [phone]
IN TER N ATI ON AL: [phone]  FAX: [phone]
CU STOMER SERVI CE (U SA): 800 -882-0116  F AX: [phone]
WW W. MOEN. COM

Copyright Creative Specialties International Literature #BA1146